could not find host

BatchPatch Forums Home › Forums › BatchPatch Support Forum › could not find host

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • November 16, 2017 at 1:30 am #10339
    doug
    Moderator

    MAC address is for Wake On LAN only. You need to use host name or IP address for everything else.

    November 16, 2017 at 11:34 am #10340
    epulone
    Participant

    Hi Doug I have tested right now it doesn’t work also using the IP address….I checked also the RPC server setting (firewall – Net property – services etc..) all seems working fine….pcesec is in system32…

    November 16, 2017 at 5:02 pm #10335
    doug
    Moderator

    Please review the following link:

    Troubleshooting Common Errors in BatchPatch

    November 17, 2017 at 10:04 am #10333
    epulone
    Participant

    I did all the actions suggested (also disabled the firewall) but it didn’t work. I tried at home with my small private network and didn’t work as well (same issue). At home i had the target machine reachable for few seconds just at the beginning and later was not reachable again.

    November 17, 2017 at 2:32 pm #10330
    epulone
    Participant

    Do you have an agent app to install in the target machines to solve this connection/not found PC issue?

    November 17, 2017 at 4:53 pm #10331
    doug
    Moderator

    Honestly, this sounds like user error of some kind. If you contact us via email we’ll trade screenshots etc to make sure you are doing everything correctly. I suspect there is something very simple that you are missing that is causing you to have problems.

    -Doug

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.